DIY Fringed Mirror
This easy-to-follow tutorial will show you how to make your own chic fringed mirror wall hanging in no time!
Cost: $25
Equipment
- Scissors
Ingredients
- 7 inch mirror Find a similar one here.
- Metallic gold paint
- Sponge brush
- Painter’s tape
- Wooden skewer Cut to 6” length
- Moldable adhesive
- Yarn
- 2 inch gold chain
- 2 pieces jump rings
Instructions
- Use painter’s tape to section off a small area at the bottom of the mirror, and paint the sectioned area with metallic gold paint.Set aside to dry.
- Cut 160 pieces of yarn at 23” long and bundle them into 4 groups.
- Fold each bundle in half lengthwise.
- Wrap the cut ends of the yarn around the wooden skewer and feed them through the yarn loop.
- Pull tightly around the wooden skewer.Repeat with remaining 3 yarn bundles.
- Attach a jump ring to each end of the metal chain, and wrap the jump ring around each end of the wood skewer.
- Form the moldable adhesive into two ovals, even in size.
- Lay the mirror face down on a piece of fabric to prevent scratches to the mirror and gold paint.
- Attach moldable adhesive pieces to each end of the wood skewer and press onto the backside of the mirror.Allow the moldable glue to cure for 24 hours before hanging the mirror.
- Once the adhesive is cured, flip the mirror over and give the yarn a haircut to create a uniform length.