Staple chicken wire to the back of your frame with a staple gun and use wire cutters to cut away the excess chicken wire, being sure to bend over the sharp edges as you go with needle nose plier or the side of the wire cutters.
Once the wire frame is constructed, spray paint the frame white and let dry.
Measure and mark where the screw holes will be in all four corners when attaching it to the wall, then use a drill bit the corresponds with the size screws you’ll be using to hang the frame to create pre made holes for the screws and spacers
Follow the directions on installing wall spacers according the packaging, and screw the frame to the wall.
Roll up the 2×8 in. strips of colored paper and insert them into the hexagon openings of the chicken wire.
Fill up the frame as much or as little as you’d like with the paper strips.