DIY Cheese Knives

DIY Cheese Knives — With the holidays on the way, you can bet I’ll gladly be assembling a cheese plate. So I made myself a new set of DIY Cheese Knives to accompany the spread.

DIY Cheese knives - Sugar and Cloth

A well-appointed cheese plate is a staple at my house when entertaining. They’re easy to create (as simple as buying things and arranging them on a plate)!

And they also look impressive when done up. So as my friends and family can attest, they’ve become my go-to over the years.

With the holidays on their way, you can bet I’ll gladly be assembling a cheese plate or two. So I, Erin made myself a new set of DIY Cheese Knives to accompany the spread. (Pun intended!)

The gem-like handles are inspired by faceted crystals and painted a deep moody blue green color. So they’ll work beautifully for both Thanksgiving and Christmas, as well as all the other gatherings along the way!

Here’s how to make a set for yourself.

DIY Cheese knives - Sugar and Cloth

Materials Needed To Make DIY Cheese Knives

DIY Cheese knives - Sugar and Cloth

How To  Make DIY Cheese Knives

Step 1. Cut the 2×4 board into two 4″ sections, and then cut both 4″ pieces vertically down the center so you end up with four 1″ x 4″ pieces.

DIY Cheese knives - Sugar and Cloth

Step 2. Discard the 4th piece as you’ll only need three pieces.

DIY Cheese knives - Sugar and Cloth

Step 3. Cut each piece with a mitre saw or hand saw at various angles all over to create facets that mimic the look of a crystal.

Work slowly, and be VERY careful not to cut yourself.

DIY Cheese knives - Sugar and Cloth

Step 4. Use the belt sander to smooth out rough edges and create additional facets. 

Additional facets are made by simply pressing a corner of the wood block into the sander, and holding it there until a flat plane is created.

After all cutting and sanding is complete, the wood piece will end up to be about 3.5″ long.

Repeat steps 2 & 3 with remaining 2 wood blocks for a total of 3 wood crystals.

DIY Cheese knives - Sugar and Cloth

Step 5. Drill a hole at one end of each wood piece for the metal cheese tools to fit snugly into.

Step 6. Paint the wood gems with 2 coats of spray paint. Allow to dry between coats.

Step 7. Next, seal them with a high gloss polyurethane spray and allow to dry completely.

DIY Cheese knives - Sugar and Cloth

Assemble the cheese tools.

Step 8. Slide the bolster onto the unfinished end of the metal cheese knife.

Step 9. Insert unfinished end of the metal knife into the wood gem. It should be a tight fit so the metal piece stays secure when in use.

If it’s not a secure fit, pull the cheese knife out and place a dab of glue in the wood drill hole.

Insert the metal piece back in and allow to dry a few hours.

DIY Cheese knives - Sugar and Cloth

DIY Cheese knives - Sugar and Cloth

DIY Cheese knives - Sugar and Cloth

The completed set makes a sophisticated addition to any cheese plate, so if you’re heading to a friend’s for Thanksgiving instead, why not make a set as a hostess gift together with this super cute DIY slate cheese board?

DIY Cheese knives - Sugar and Cloth

Please note that we may earn a commission for some of the above affiliate links. However, products featured are independently selected and personally well-loved by us!

Leave a Reply

Your email address will not be published. Required fields are marked *

5 Comments

  1. This is such a cool idea Erin! The handles look beautiful and I love the color blue you chose: it has a nice balance of chic and rustic.

    Any ideas for a matching cheese board?

  2. Could this spreader kit be used with wine corks? If so, would you also buy the bolsters or would you just glue them into the cork?